Digital download · 300 DPI print-ready · Secure Stripe checkout · Download instantly after payment · No shipping. No tax surprises.

The packs

Every listing below is ready now. Add packs to one cart and check out once — your files are ready to download instantly after payment.

3D Print Files — print-ready models for your printer. The full shelf lives on the Shop page.

Price
Showing 5 of 5

3D Print Files

Flower of Life Sphere cover — a gold woven lattice sphere of interlaced circle ribs on black $19 STL + 3MF · 110 mm

3D Print File · Sacred Geometry

Flower of Life Sphere

For FDM printers · The hero piece

The Flower of Life as the three-dimensional object it actually is: a sphere wrapped in the flower’s own line-work — one woven lattice with open cells, drawn from the 19-circle construction and mirrored at both poles. Not a flat picture pushed upward.

Honest print notes: the lower half is all overhang — this one needs supports, and at the tested settings it is a 22-hour print. The guide inside states everything.

  • STL + 3MF files — the two formats printers actually use
  • 110 × 110 × 99 mm — fits a standard 220 × 220 mm bed
  • Slice-tested in PrusaSlicer: 22h 8m · 167.8 g PLA (0.20 mm, organic supports + brim)
  • Print guide included — settings, orientation, support notes
  • Personal license — print for yourself and as gifts
Buy now

Metatron Frame cover — a gold cuboctahedron strut frame with node spheres on black $15 STL + 3MF + STEP · 88 mm

3D Print File · Sacred Geometry

Metatron Frame

For FDM printers · CAD file included

Metatron’s thirteen points built as a real solid: a cuboctahedron frame — 24 edge struts plus 12 spokes into a center node, fused as one piece. The STEP file is the same solid in CAD form, for buyers who edit in CAD.

Honest print notes: the top struts bridge about 56 mm — print with supports (organic supports + brim in our test).

  • STL + 3MF + STEP — printer files plus the true CAD solid
  • 88 × 88 × 83 mm — fits a standard 220 × 220 mm bed
  • Slice-tested in PrusaSlicer: 10h 35m · 72.1 g PLA (0.20 mm, organic supports + brim)
  • Print guide included — settings, orientation, support notes
  • Personal license — print for yourself and as gifts
Buy now

Mandelbulb cover — a gold fractal bulb solid with folded, bulbous surface detail on black $15 STL + 3MF · 110 mm

3D Print File · Fractal

Mandelbulb

For FDM printers · A true fractal solid

A true fractal solid: the Mandelbulb distance field sampled point by point on a 170-point grid and surfaced exactly where the field crosses zero — every bulb and fold is the mathematics itself, not an artist’s impression. A flat base is cut underneath so it sits.

Honest print notes: overhangs across the upper folds — print with supports. A long print at the tested settings.

  • STL + 3MF files — the two formats printers actually use
  • 110 × 110 × 70 mm — fits a standard 220 × 220 mm bed
  • Slice-tested in PrusaSlicer: 18h 33m · 153.6 g PLA (0.20 mm, organic supports + brim)
  • Print guide included — settings, orientation, support notes
  • Personal license — print for yourself and as gifts
Buy now

HYPERFRACTA Julia Solid cover — a gold swirling fractal solid on black $15 STL + 3MF · 115 mm

3D Print File · HYPERFRACTA

HYPERFRACTA — Julia Solid

For FDM printers · From the HYPERFRACTA engine

From the HYPERFRACTA series’ own engine: the quaternion Julia set sampled as a volume and surfaced where its distance field crosses zero — the same field the HYPERFRACTA designs are drawn from, here as the object itself. A flat base is cut underneath so it sits.

Honest print notes: the folded surface overhangs — print with supports (organic supports + brim in our test).

  • STL + 3MF files — the two formats printers actually use
  • 115 × 98 × 63 mm — fits a standard 220 × 220 mm bed
  • Slice-tested in PrusaSlicer: 9h 49m · 100.2 g PLA (0.20 mm, organic supports + brim)
  • Print guide included — settings, orientation, support notes
  • Personal license — print for yourself and as gifts
Buy now

Seed of Life Cluster cover — seven fused gold domes in a hex arrangement on black $12 STL + 3MF + STEP · 104 mm

3D Print File · Sacred Geometry

Seed of Life Cluster

For FDM printers · Prints support-free

The Seed of Life in its native three-dimensional form: seven spheres of 52 mm — one at the center, six around it at one-radius spacing, the same arrangement the flat seed draws with circles — fused into a single solid. From above, the domes trace the seed. The STEP file is the same solid in CAD form.

Honest print notes: this one prints support-free — the domes rise gradually from the flat base. Tested with no supports and no brim.

  • STL + 3MF + STEP — printer files plus the true CAD solid
  • 104 × 97 × 38 mm — fits a standard 220 × 220 mm bed
  • Slice-tested in PrusaSlicer: 6h 52m · 84.0 g PLA (0.20 mm, no supports)
  • Print guide included — settings, orientation, support notes
  • Personal license — print for yourself and as gifts
Buy now

← Back to the store

Secret Patterns Studio

Support

Need help with an order, a download, or printing? You’re in the right place. Support is by email — no phone or postal address is published, and you never need to share card details to get help.

This is the Customer Support page for Secret Patterns Studio.

How to get help by email

The fastest way to reach the studio is to email us at [email protected], or reply to your Stripe receipt / order confirmation email. Replying to the receipt keeps your order attached, so we can find it straight away.

Please include:

  • The email address you used at checkout
  • The pack name (for example Hidden Forest, Stencil Collection, SVG Bundle, KDP Commercial Bundle)
  • What went wrong — for example, “my downloads aren’t showing” or “page printed cut off”
  • A photo or screenshot if printing went wrong

We aim to reply within 1–2 business days. Never email card numbers — payment is handled by Stripe and we never ask for them.

Common fixes — try these first

  • Downloads not showing? Your download buttons appear on the thank-you page right after payment. If they don’t, open My files below and enter the email you used at checkout — your orders are listed there. If your files still don’t show, email us and we’ll help.
  • PDF won’t open? Try a different browser or a free PDF reader, and re-download the file from My files below on Wi-Fi if the first download was interrupted.
  • Wrong pack? Tell us by email as soon as you can — see the Terms page for the refund rule.
  • File looks damaged or corrupted? Email us — a faulty file will be replaced (see Terms of Service).
← Back to the store

Secret Patterns Studio

Privacy Policy

What information is collected when you buy a printable pack, how it is used, who it is shared with, and how it is kept secure — in plain language.

Last updated: 7 November 2026 · Applies to purchases from Secret Patterns Studio.

← Back to the store

Secret Patterns Studio

Terms of Service

The terms that apply when you buy and use printable PDF packs, SVG files, and bundles from Secret Patterns Studio. By completing checkout you agree to these terms for that purchase.

Last updated: 7 November 2026

$0Cart is empty